Stainless steel anti-static casters.
Two disciplines in one caster: stainless construction for clean and washdown environments, in an anti-static build for ESD-protected areas. Three sizes at 90 to 100 kg per caster.
Specification
| Series | Stainless steel anti-static casters |
|---|---|
| Wheel | Anti-static build, 75–125 mm × 32 mm |
| Load capacity | 90–100 kg per caster by size — see the size table |
| Construction | Stainless steel fork and hardware (grade locked on the quotation where required) |
| Configurations | Swivel, rigid, swivel with brake, threaded stem |
| Mounting | Top plate 95 × 64 mm (holes 74 × 45, Ø 8.5) or threaded stem M12 × 30 |
| Resistivity | Confirmed against your stated requirement on the production sample — not published as a generic figure |
| Documentation | CE / RoHS documentation available on request — ask in the RFQ and the documents for this series accompany the quotation. |
| MOQ | Confirmed per order in the written quotation |
| Lead time | Confirmed per order in the written quotation |
Values marked as a class or target are the specification this model is quoted and sampled against. Final confirmed values are stated on the written quotation and verified on the production sample before bulk production.
Some environments impose both rulebooks at once — pharmaceutical and electronics clean production, medical device assembly, battery and semiconductor support areas: equipment must be washable and corrosion-proof, and it must not carry a static charge into the process. This series is the anti-static build of the stainless medium duty platform, made for exactly that overlap.
As with our other anti-static series, we do not publish a generic resistivity figure: state your programme's required range in the RFQ, the production sample is measured against it, and the confirmed value is recorded on the written quotation.
Sizes in this series
| Size | Wheel Ø × width | Load per caster | Overall height |
|---|---|---|---|
| 3 in | 75 × 32 | 90 kg | 105 mm |
| 4 in | 100 × 32 | 95 kg | 130 mm |
| 5 in | 125 × 32 | 100 kg | 155 mm |
Dimensions in millimetres unless shown otherwise. Values are the series table values; the written quotation confirms the final drawing for your size class before sampling.
Configuration options
- Standard anti-static build on a galvanized platform — see the anti-static series.
- Stainless TPR build without the anti-static requirement — see the stainless TPR series.
What the sample verifies
Before bulk production, the production sample of this series is checked against the locked specification: wheel diameter and — critically — wheel width measured, tread hardness verified where the series states it, bearing type confirmed, fork and plate dimensions measured, and load performance tested per the stated convention (EN 12532 / ANSI ICWM). The approved sample becomes the reference for the shipment, and the order carries batch traceability back to it.
Request pricing for this series
About this series
Cleanroom and ESD at once — what decides the spec?
Your two programmes: the clean/washdown requirement sets the construction, the ESD programme sets the resistance range to verify. Send both in the RFQ and the quotation locks both.
Can the sample be tested for both?
Yes — the sample stage checks the locked specification, which includes the stated resistance range alongside dimensions and load.
Need this caster under your own brand?
Private label, custom packaging and carton marks are available across the range — mention it in the RFQ and the quotation will include the branding steps.